Rental ID: PARALINX_ARROW_PLUS_HD_WIRELESS_HIRE
The Paralinx Arrow Plus 2:1 HD wireless video system is small, light, compact and operates on low power consumption of +5V.
The system is 1:2, so supplied with 1 x HDMI Transmitter and 2 x HDMI Receivers that provide a 300ft (90 metres) true line-of-sight wireless Tx / 2 x Rx kit, both transmit and receivers are via HDMI.
Supplied with 3 x RAVPower 13400mAh batteries which can power the Paralinx Arrow Plus 1:2 kit for over 8 hours, constant usage. Can also be powered by V-Lock batteries which can be supplied (additional). We also supply the Paralinx Shield in our Paralinx kits for no additional cost.
Signals are uncompressed 1080p 4:2:2 10-bit with a delay latency of only 2ms (milliseconds), both RGB and YCbCr are supported. Supported framerates are 23.98p, 24p, 25p, 29.97p, 30p, 50i, 50p, 59.94i, 60i and 60p.
HD-SDI cameras can also be used with the Paralinx Arrow Plus system when combined with our simple Atomos HDMI to HD-SDI inline converter, or using a Teradek Bolt Pro kit which we can also supply.
The system can transmit and receive line-of-sight up to 300ft (90 metres) or 150ft (45 metres) in non-line-of-sight environments.
The receivers are very compact about the size of a deck of playing cards, the transmitter is half of that size, comparable to a HDMI dongle / USB dongle size.
The antennae / aerials are built in and omni-directional. The Paralinx Arrow Plus system’s frequency is dynamic and will automatically adjust to avoid RF interference from other sources.
The signal is uncompressed and with a barely noticeable to the eye 2ms delay, this system is untouchable for the cost. Almost every camera has HDMI video out these days and for those that don’t we can supply the Atomos Connect H2S HDMI to HD-SDI converter (see below).
A specialised implementation of the AMIMON WHDI standard is used by Paralinx on the Arrow Plus systems that features better wireless performance.